Traditional Octo or BC Inflator integrated

[WreckDiver]

Any of you guys use the Dive rite transpacII, LDS says there are no integrated ones that will work on it, seems to me that spearone uses the integrated setup. I would like to put one on mine.

[junior]

Just measure your inflator hose diameter and compare it to the diameter of the integrated octo of all the different models available. Everyone and their mother makes one these days. I bet one will match up.

Also, if you can get a hold of an older Sherwood model, it fits in line of the actual LP hose and you don't need to fit it to the corrugated hose itself. I have this setup on a ScubaPro BC and it works well.

[joens]

your LDS is mistaken .I dont have a transpak but I do have a Dive Rite classic wings for my backplate .I looked in Dive Rites website and it looks to me as if the transpak uses the same inflator hose as the classic wings and just about every other BC out there .All it is is a hose I think 1" that attaches to the inflator. Oceanic ,seaquest and US Diver sometimes use a smaller hose 3/4" but you can get an adapter to make the standard inflator work [or just stretch the hose ] .bottom line is I see no reason it wont work. the only thing is the little pins that hook to the cable that pulls the dump valve are often different so make sure your new inflator has one as the one on your inflator may not be the same .
Joens