View Full Version : Who To Do a glassed in Du?
02-19-2007, 09:46 AM
I need to do a glassed in transducer on my Aquasport 250 Explorer.
I am looking for suggestions in the Tampa area, ideally a mobile service done at the marina (Tampa Bayside).
02-20-2007, 04:49 PM
It is an Airmar B256 installed flush with the bottom of the hull.
02-20-2007, 05:46 PM
Trailer it over here. I have a hole saw and ive been drinking :drunk:
02-21-2007, 07:02 AM
Here is an example of what I want to do:
Here is what I have to work with:
Thanks for looking,
02-21-2007, 10:29 AM
I got Pat beat, Sawzall and Tequila. It can be cut with a Roto-Zip, last one we did was with router and wooden template taped to hull. Be sure to seal any exposed glass with Gelcoat or 5200. Need to sand edges of main and screw holes to prevent stess cracks! Good luck
vBulletin® v3.8.1, Copyright ©2000-2013, Jelsoft Enterprises Ltd.