Gun poll

[Reef Raider]

How about we do a gun poll along the lines of
What gun do you shoot ?

S.S.
JBL
BILLER
RIFFE
Rob Allen
I know theres more

[Speargun]

Mine is a 48" mahogany SEA HORNET made by J.T. Preece & Co. Sydney Austrailia. I don't see the S.S. name anywhere on it, but it sure does look like one.
:confused:

[baitwaster]

Riffe competitor #c2xs 48" Three 9/16" bands. I also have a 24" ab billler. A 48" rhino commercial may be coming soon.

[greyface]

48" padauk Biller, 2 - 5/8" bands, spare shaft w/ .357 mag , Trident coil shock line. Will eventually go with S.S. comm. line set up. Some day step up to a S.S. PT52LC.

[f94gator]

52" JBL Woody Magnum, 2 9/16" bands. Switching to SS at some point or another.

Yeah, I know what you're thinking. Man, that's a big Woody.

[Steel Shootin']

I have a 52" SS Rhino Commercial (recently made famous by DabullTrouble :D), and a second 52" Commercial SS Paulope.

[swimndive]

Been using one of Kevin's 52 inch commercial "harvesters" since '97. Got rid of everything else. It's not as pretty as some of the new ones he was showing in Las Vegas, but it still works like the day I bought it. ed

[subdude]

63' JBL Woody Magnum, 3 - 5/8 x 25" bands, I use the stock shaft as a spare (sits at the house) and shoot a 3/8x48" shaft, kevlar lanyard with stainless quick release.

Still have my old Scubapro Panther too.

subdude

[Grande]

52" SS commercial teak.

[Charlestondivin]

115cm Beuchat carbon fiber euro gun with riffe single flopper shark fin shaft. Quick release on the mono line.

[FredT]

Top end is a custom Ultimate bullpup Blue Water "rig gun" that takes a minimum 72" shaft length currently rigged with a 83" tip to butt 3/8" assy, 3/4" Riffe rubber custom bands and a riding rig.

Backup to that is an Ultimate Long Shot again rigged with Riffe bands but using a 60" 5/16 dia shaft.

I also have several "rig guns" custom built from JBL XHD triggers mounted on heavy wall AL or SST tubing with Bandito front ends. Bands are agin the heavy Riffe rubber. Gun tube length is trimmed to _JUST_ allow a slide ring to fit under the tip when mounted on a 60" shaft. None of my rig guns float, but most are near neutral with the shaft out. The drawback to these guns is that the trigger design increases trigger pull proportional with band tension.

The Ultimate trigger is easy to release at ANY band tension that won't shear the pins, but regretably is no longer manufactured.

There are also a couple of "baby rigs" cut back to take a 48" shaft for use off the Fl panhandle.

FT

[seastalker]

70 inch custom built Sea Hornet for freediving
52 inch Commercial by SS
48 inch Billar for ???? collecting dust/loaner

[MarkD]

Standard S.S. Rhino 52"

[Brad B]

54" SS Commercial Rhino

[Reef Raider]

54" S.S. teak COMM. w/ .223 P.H. and some custom rigging
42 biller for a back up or low vis dive

[dlock]

Riffe 48" C2X...which is for sale,if I haven't mentioned it lately:D
48" SS Teak Limited Commercial...which I just bought and am goin' to go ****in' crazy if I don't get to shoot it SOON!!!!

[Reef Raider]

You should post it here in guns you never know. What do you need to get out of it. Really take a pic and post it!!

[dlock]

I did post it on the board, but it's a tough place to sell a Riffe:D

[Reef Raider]

Call CAPT GENE he might take it on consignment

[dlock]

I'm asking 300.00 for the gun,two shafts and I just put new line on it. It's in "like new" shape. I'll have it with me at the seminar.

[Steel Shootin']

Hey dlock, have you considered putting that gun up on ebay? I don't sell a lot on there, but when I do, I usually come out all right. If you don't have an eBay account, I'll be happy to take photos of it and list it for you on my account. Just an option to consider.

[Screen Name]

Two stock & std Spearfishing Specialties 52" black Rhino with yellow hi vis butt. Stock & Std. It aint gettin away, baybeeeee!!!!

Also, a custom, patented, 48" double barrel gun. Think I'm making it up like all my other posts?

http://patft.uspto.gov/netacgi/nph-Parser?Sect2=PTO1&Sect2=HITOFF&p=1&u=%2Fnetahtml%2Fsearch-bool.html&r=1&f=G&l=50&d=PALL&RefSrch=yes&Query=PN%2F5595166

Oops, der it is!!!!!

[Screen Name]

Forgot my three pole spears for Bahamas!!!!!!!!!! Complete with powerhead attachment for Mr. Sharkey.

[Reef Raider]

I sure would like to see that DBL barreled gun better yet I wish I could shoot it one day .

[rusty]

SS Rhino 48", getting ready to mount a 2nd shaft (got the kit, just haven't had time), with a .223 PH. Not the biggest, but works great.

[Stone]

Me: 53" JBL Woody Sawed-off Magnum
Wife: 43" JBL Woody 38-Special
Wife's old gun: 48" Biller

[slipknot]

fredt,where did u get your ultimate?i bought my 60"long shot in miami back in 1990.i love it,and still use it today.its a shame they went out of business.it is a quality gun,never had any problems.i thought they were a small south florida company.

[blue gun]

Biller 54 and a powerhead in case I get attacked by a Jew Fi....I mean a shark.;)

[dlock]

http://www.atypically.net/smilies/biggrin.gif

[FredT]

Originally posted by slipknot
fredt,where did u get your ultimate?...i thought they were a small south florida company.

I bought it from the maufacturer in the Lantana/Boynton area in about '92. A buddy and I were "unofficial reps" showing the gun over here as a JBL/Bandito hybrid rig gun alternative. He manufactured just 2 of the overlength guns for Matt and me. Matt has since moved to the FL panhandle and retired his big gun except for trips back here for some serious hunting. He replaced it with a Riffe bullpup. Matt plans on creating a shorter hybrid woodie sized to use a standard Riffe shaft with the Ultimate bullpup trigger group off the rig gun, while still allowing the trigger group to be dropped back into the ultimate body for rig hunts.

BTW the powerhead they developed is the slickest thing since sliced bread. Cheap, disposable, reliable, easy to use, and still allowed the use of a standard slip or winged tip. I've tested them in sizes ranging from 9mm to .444 Marlin. The .444 is reported to have taken the head clear off a large hammerhead, and deafened the diver for a couple days. I have a few left in 9mm and .357, as well as the specifications to make my own if it ever becomes necessary.

The Ultimate story is a sad one. They made excellent products at a great price, but the company was killed financially by a family member's bad habit.

FT

[Kasshia]

Riffe Competitor 3XS and a JBL 6' polespear.

[100days-a-year]

54 SS Biller ,3 SS bands 1 22", 2 25".A 48 JBL(Just Bent 'Luminum)for loaners ,lo-vis and smaller(<5#)fish.

[SpearDiverTampa]

Just bought a Riffe Competiter 2XS and i've had a JBL Sawed Off Magnum XHD.

[Diver Dan]

54" SpearfishingSpecialties, Cressi Sub pneumatic, that hasn't been used in awhile.

[straight shaft]

Graciasub 63" with weighted full side stocks powered by four 5/8"x29" power bands, Delrin enclosed track and Delrin trigger mech. 5/16" x 66" spring stainless shaft and 5 1/2" slip tip. Teak stock of course...sorry Riffe.:cool:

[stix1]

Picasso 90 cm Twin Shot
JBL Blue Water Gun
Juan Garcia 52

Wish List: Darell Wong Tuna Gun

[poorshot]

48" Biller


Wish list 54" comm ss

[Reef Raider]

Glad to see everyone likes this thead lets hear it from YA"LL!!

[Fish_Dip]

Biller 48 and a Biller 36. Some old breakdown pole (solid and heavy) for alot of inshore fun.

[f94gator]

Need to update my answer. I'm now the proud owner of a 52" SS commercial. Yee Haw!!

[richhermes]

Does Jen know??

[greyface]

Ssssshhh...not so loud, Rich!:p

[Reef Raider]

Best of every thing with that new gun GATOR. You can find your oun LUCK right !! You chose wisely!!

[f94gator]

Does Jen know what? Huh? I don't understand. This is the gun I've always had.

;)

[johnhermes]

Yeah, yeah, same here....

[fishhunta]

rob allen railgun and a riffe no Kaoi- i much prefer the rob allen, they look really shitty, kinda like a toy gun, but there is no gun withthe accuracy

[Otter-B-Huntin']

Freediving - Brown water (3' to 8' viz) - Riffe Metal Tech #1 with Teak Float Wings and short Hawaiian Shaft, two wraps of 400lb mono line, 1-2 bands 9/16".

Freediving - 8' to 20' viz in-shore, Riffe Metal Tech #1 with Teak Float Wings, stock Hawaiian Shaft, two wraps of 400lb mono line, 2-3 bands 9/16".

Freediving - In-shore Bluewater, Sporasub Black Viper Railgun, Riffe Euro Shaft, two wraps of Dyneema line, 1-2 HDessault Bands w/Custom Dyneema Wishbone.

Freediving - Bluewater. Riffe Metal Tech #5, w/Full Teak Wing Kit, Enclosed Track, 5/16" Threaded Shaft, Riffe Ice-pick Slip-tip, Aluminum Muzzle, 4 9/16" Bands, rigged w/SS Cable and Breakaway System to Float-line Assembly.

SCUBA - Wreck-diving, 75cm Sporasub Aspic standard.

[straight shaft]

Sorry, but I've never heard of a Riffe Metal Tech with an enclosed track. Please supply pic.

[fishhunta]

i have seen the riffe enclosed track- pretty cool gun

[Otter-B-Huntin']

Here you go:
http://www.speargun.com/images/ectrack.jpg
:cool:

[straight shaft]

Daaaaaamn!!! Here, I thought I had seem them all...thanks for the pics!

[100days-a-year]

Is that closed track an option or can it be retro-fitted to other Riffes?I love thier guns but that open muzzle sux for rapid fire.

[Grande]

I think its some kind of kit. www.speargun.com

[Reef Raider]

Send a P.M. to Capt. Gene he has one and might know about that ..

[inletsurf]

JBL 450 Mag XHD

[Steel Shootin']

Captain Gene could definitely answer your questions on the Riffe. I was at his shop today and he let me "play" with the two enclosed track Riffe's he just got in yesterday. Interesting guns.

[Otter-B-Huntin']

Both, it is an option on Metal Tech guns and can be retro-fitted on any of the Riffe Metal Tech Guns.

[slippery chicken]

the only gun to use is a ss 52 teak commercial. tried the rest then threw them out, and bought another ss commercial as a back up.

[Merk]

52' SS Commerical & Biller 48 Special of which both are collecting dust...... haven't been out since Nov. 4th when DT shot the big gag...... this weather sucks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[richhermes]

OK, I'll participate in this thread now.

I have a AB Biller 48 special and am now the proud owner of a 52 SS pau lope commercial.

Let's kill something.

[Pimp'in]

jbl 450 mag. anything smaller just isn't enough.

[Divin' fool]

48" Biller....modified for freeshafting w/ spareshaft holder. I have started using the B&B shafts (54"). I also carry a .223 strictly for "emergencies":D .
When I'm bugging I carry a Scubapro pneumatic (38"?). It's short, quick and powerful. I can reload it in seconds (sounds like my love life).

[greyface]

LOL!!:D

[Paul]

I shoot a JBL 450 with 1/2" bands and 5/16" shaft. love it - have tried other guns but always sell em in a week or two.
Paul

[Hogwild]

A modified 48" AB Biller with 22" 5/8 bands with a SS Butt Extension, SS Tether Line and SS spair shaft holder holding a .357 PH. Just got tired of studio wrestling with AJ's. :cool:

52" SS Rhino is in my future.

[gotta go]

Just gotta use my jbl 4d46 'JIMS SPECIAL'

[Reef Raider]

If you are new here we sure would like to know what you are shooting no matter what it is even a pole spear will get you fish.
Then you can give us the $10.00 to all members.

[201proguide]

i suppose its 'bout time for me to post my gun... i have a 48" commercial mohogany. its a sweet gun, and cant wait to use it agian.

[Reefrat]

I've got a JBL Sawed-Off Magnum that I had a third band added to and and had all the bands upgraded to a larger size. I also just added a .223 powerhead.

I also carry a custom polespear with me. It is a telesoptic(sp) pole that I brazed a 5 prong frog gigger on. It is about 5' extended & retracts to just less than 2' and I clip it on my side to deal with the run of flounder & sheephead that come in the spring.

[Shooter Dan]

Rhino
Well Used!

[Kasshia]

Riffe Competitor 3XS and a JBL 6' polespear.

Update: I was planning on getting #1 (10yr old son) a Compeititor #1, but decided there was no point in a #1 if he could reach the bands on a #2. So after trying a friend of mines Riffe Competitor #2X he now is the proud owner of a brand new customized Competitor #2. The customization part is he could reach the bands, but couldn't cock it by himself, so I made him three 1/2X20" bands. That didn't work either, so I made him three 1/2x26" bands. That will get him started. As he gets stronger and gets his technique down I can give him more power by shortening the bands or make him new shorter ones.:D

All you triggerfish out there better look out, here he comes!!!:D

[Speargun]

:D :D :D
Just added a 52" teak SS commercial gun to the collection. Can't wait to shoot some fish with it.

The others:
48" mahogany SS production gun.
2 - 48" & 2 - 36" aluminum guns (Voit I think) that don't get used because they were props from the TV show "Sea Hunt", which was filmed right down the road from me.

[Reef Raider]

The local stuff looks better all the time get out there and stick-em.
Good choice on the SS gun enjoy it .

[scrounger]

i shoot a modified riffe metal tech. 3, a com 1, a modified comp 00( shoots better that the 75 cm picasso), picaso asegia i didnt buy it its used when i only want to shoot black fish. I am in the process of buildind a gun it will turn out like a riffe mid. handle gun a bit larger than my metal tech 3.

[sharkbait]

Have 5 Riffes, two comp 2xs, one comp3xs, one standard 3, and one metal tech3. Favorite is standard 3 with a kill rate over 90%...

[Prodigal Son]

I'm new, but no $10 (spent it all on new dive gear). I have a Riffe Comp 1S, my first teak gun. I notice it's much tougher to load than my old JBL SOM.

[Blackfoot]

Sask here,

i use a Riffe MT3 with enclosed track, reel (1,000 lb. test) and floater wing kit. however, when i was meeting with jay and julie (riffe) they were making a larger wing kit for the Mt's with the reel.. the other was much smaller (the picture with julie and her 42lb white sea bass)... the newer one is about double the size but the gun is still negative. the only other upgrade i need to do is the aluminum muzzle with the extra bands and icepick tip.

[Reef Raider]

Good to see more of you WEST coast shooters here be sure to spread the word about the board thanks .

[bgbill]

I have 2 Riffe #3 Standard, a Hawaiian, #2 Competitor and a 48" Biller

[Reef Raider]

What no pole spear??

[Shooter Dan]

I'm Saving for the BIG GUN!
http://www.momentoffame.com/snapshots/MomentOfFame/m33041.jpg

[fishkilla]

60 inch biller with 72inch freeshafts. remember always carry a side shaft. my uncle vinny always told me "two in the head to make sure they're dead." oh and always always have snappy new bands to shoot with. try to create rythme and consistancy right spear one!

[Radical Fish Co]

If you can find an Ultimate.... take it

[Spear One]

Rogers on the that Killa!

[joens]

52" SS rhino with commercial muzzle. and a smaller JBL for freshwater small fish . I would just use the rhino for everything but in the lakes I spearfish in the vis is so bad I cant see the end of the rhino.
Joens

[Reef Raider]

joens what kind of shooting do you use the SS for??

[junior]

I was shooting a 44" Riffe down south, but it was reclaimed by my friend before moving. Just purchased a 54" Biller and shot it last weekend for the first time. I was happy:) I like 'em both, probably get a 44" Riffe for myself sooner or later.

[sharpshooter]

Use 2 bands that are 5/8 diameter and 18" long. I tried that 270-300% length fromula. I shot at a nice gag and the shaft dropped a foot in front of his nose and skedded under his chin. Before the next dive i cut the two bands down. next dive i tried a 4lb. sheepshead (tank) at the same distance and he was history. moral of the story is stick with what works for you.!!!

[Spear One]

Rogers on stickin with what works!

[scrounger]

If you stretch you bands past the recovery point they grow. So you start with a nice new band that is perfect at 300% then after a couple minutes its only at 270% because you break the fibers so how small you cut your band depends on how nice the rubber you buy is. Cheaper bands cant handle the 300% elongation that the expensive material can.

[kitefisherman]

My original gun: a 50" teak Riffe Hawaiian mid-handle gun armed with a 57" Hawaiian shaft powered by three 5/8" x 24" Riffe bands. This is my “East Coast” gun which has an outer range (gun butt to spear tip) of 24'. This gun has proven itself time and again as an accurate, hard hitting, long range gun. It is the gun that I started spearfishing with, and I have absolutely no complaints other than it takes time to reload. This is not a problem on the East coast as I usually don’t shoot much more than a couple times a dive.

My new gun: a custom 52" Spearfishing Specialties custom teak Commercial gun. Custom because Kevin built it with a Biller handle and trigger that incorporates the Biller line drop system. The gun, with its spare shaft holder, is two guns in one: a standard Commercial gun as well as a gun that accommodates the the Spearfishing Specialties EZ load line system that is integral to the Classic line of guns. In either configuration, the gun’s bands power a 60" stinger single barb lineshaft that can be converted to a freeshaft simply by disconnecting the line clip. This gun has an outer range (measured from butt to speartip) of 21" rigged with the EZ load system and 16.5" rigged with the Commercial system. It is presently my “West Coast” gun, but I am open minded (and optimistic) that it will work itself into the starting line up for the East Coast as well. If I become a freeshaft convert, it may become my only gun.

I'm sure that I will have fun figuring it all out. :)

[BurlyEarl]

Same setup as Greyface. 48" Biller, tried and true.

[mushkee]

48' A.B Biller...Reel...200ft of 500lb....
poor vis- 42' biller

Soon to come...

reef gun-120 cm Rob allen rail gun...w/ a new omer pel. reel...or a cressi reel...

bluewater-still deciding...going to buy in the summer...either a riffe, wong, or maybe a long allen if i can load it...

[groupa-man223]

42 Rhino w/ 48 in shaft, 36 JBL sawed off magnum, pole spear, pretty simple but gets the job done!

[Spearooo]

I had a 130 two band Rob Allen that i loved it was snatched from me by a 10 foot hammerhead that chomped on a nice AJ I had just speared and made off with my rig. Now I have a riffe C-3x with a reel and 9/32 tahitian shaft. I also have an old school Arbalete and Hawiian sling that I use inshore.
I hab a JBL explorer 24 for a while but the trigger and grip busted and I decided to never again buy that brand.

[rigdvr]

Bluewater - Wong Ono enclosed track(60"), 65 inch 5/16 shaft, aimrite sliptip, breakaway setup

Reef - Wong Carbon Fiber Hybrid(50"), 55" 9/32 flopper shaft, Omer 50 reel

Rigs - Riffe MT #4(56"), 60" 3/8 shaft, Riffe icepick tip, aluminum muzzle, riding rig/tie off setup

[Reef Raider]

Rig diver welcome aboard ! Sure would like to hear about your rig set up . You use a riding rig and a tie off I take its one in the same . CK your PM.

[Spearman]

I shoot a stock Riffe Metal Tech #4S I bought new a few months back.

[kabo123]

120 cm rob allen
130 cm rob allen my #1 choice for everything

riffe island
riffe #3 standard
48 biller
38 biller

riffe rubber on all except the billers jus havent used them reciently

[yonfuki]

OMER Excalibur 90 cm

now if only i could find a shop that sells spare bands and shafts

[Kasshia]

Update: Is this thread still around? Anyway, after trying a Hawaiian shaft on my Riffe Competitor #3XS, effectively making a #3X, for the reef hunting we are doing and finding it more effective, #1's Competitor #2S now has a Hawaiian shaft on it, effectively making it a #2. I'm holding on to the threaded shafts and double barbed points in case we want to change back sometime later on .:)

[Reef Raider]

So it is still here this is a good place for any new members to start. Seeings how we have 700 ++ members here sure would like to see more replys to this..

[Rick Dawg]

Riffe Metal Tech #5 with teak stabalizers in front, aluminum muzzle, 4 5/8 bands, and a breakaway system. Good stuff for big pelagics.:D

[Fishkabobs]

rhino 54 with all the trimmings

[neondiver]

48" AB BILLER SS PROFESIONAL W/ FRONT MOUNTED FLASH LIGHT AND STRAP MOUNTED FLOUNDER GIG.

[Fish Steeler]

First Post: Hi everyone! I have been diving for years and have been spearfishing a few times on a charter boat out of Fourchon, LA. I have my own boat and fish out of Venice, LA often. I just recently put a tank rack in my boat and bought a speargun. I have been lurking here for a couple of weeks learning alote. I would like to hook up with some loacal guys with some experiance for my first trip. Probably will be the Tarpon Rodeo next weekend. Regardless something getting speard next weekend! Oh yea the topic!!

JBL Magnum three 9/16 bands single wrap (I guess!?)

[loose_cannon]

SS 52" Rhino sport and a couple of Ray Odor freeshafts.
Misc pole spears.

[speario]

i got a greek metal gun called (balco sub) ,...never heard about it ....,i know ,but its the best gun i found here in egypt !!!?
its short (90 cm) weak ,unaccurate ,loud .........i think fish are starting to like it ,they say its harmless !?
well i wish i can get a beter one. :)

any body who got an extra gun he want to sell (or exchange with my gun :) )i will be very glad to know ,just send me a pm or email .

[uluabusta]

1) Darryl Wong 50" titanium/teak hybrid w/Omer reel.
2) Custom 52" titanium/teak hybrid utilyzing Riffe trigger & shaft, Darryl Wong grip, w/ Omer reel.
3) Picasso 100cm Century utilizing Riffe euro shaft and Picasso reel.
4) Home-made 55" aluminum barrel gun utilyzing an Undersea trigger system and butt cap, Darryl Wong double band open muzzle, custom pinned shaft and JBL reel.
5) Graphite/aluminum hybrid 3-prong pole spears (6' & 8")

[nyTroX]

Biller 42, but I'm just now thinking about getting back to spearfishing. I haven't shot anything since May 2000.
BTW, Thanks to Seaweed27 for showing me the way back to spearfishing!! I'll be diving more as a result.

[Mark Blanchette]

Mares Califorian pneumatic. About 3' long. Works good on the rigs in the gulf. Seems to be easier to reload than a band gun but I've never used a band gun.

[Grin]

Still have a 48 Biller. Still waiting for the water to get warm around here. I did some mods, thanks to the help from this board. I think the shaft I bought is 60" and I also bought some Blue bands, I forget what size. All this talk about guns makes me want to get something bad assed. I probably only pull the trigger once or twice a day, so something super powerful with a super long range for the spooky groupers we have around Stuart would be the ticket. Any suggestions?

[bgbill]

Originally posted by Grin
Still have a 48 Biller. Still waiting for the water to get warm around here. I did some mods, thanks to the help from this board. I think the shaft I bought is 60" and I also bought some Blue bands, I forget what size. All this talk about guns makes me want to get something bad assed. I probably only pull the trigger once or twice a day, so something super powerful with a super long range for the spooky groupers we have around Stuart would be the ticket. Any suggestions?

A riffe #3 Standard is the main gun I use

[Kasshia]

Update: Just returned from a business trip to find that the new Riffe Metal Tech #1 has come in. This one is going to be my night gun. I was going to order the aluminum muzzle and enclosed track at the same time, but the FFO (family financial officer) balked at the extra ~$100, was still able to get her to go for the gun so those will get added later.

[Reef Raider]

I just had to up date this my S.S. teak 54" commercial now has 180" of steel and is ready to give the RIGS a SHOT..

[Apex]

Right now I have a 120CM Rob Allen that is double banded and shoots 7 mm shafts. I am going to try and get some 7mm and 8mm spring stainless steel shafts custom made for this gun. Hopefully I can buy a custom 52" titanium Daryl Wong hybrid type gun or have someone make one for me soon.

[omni]

JBL 38 special with extra power band. And soon to be a 55 shaft sporasub black viper with reel. All of this for freshwater.

[ROCK BOTTOM]

Riffe makes some fine guns but I am too cheap and stupid to own one (yet). I shoot a JBL 450 XHD with three 28 inch bands, detachable tip and a riding rig. My stupid spearo trick is to lose track of my gun during a close encounter of the amberjack kind. Normally, I give the gun a toss over my shoulder, stabbing my hand through the bands, securing the gun around my upper arm. But..... sometimes I miss and just let the damn thing float to the surface and look for it when I reach the boat(sometimes my buddies doing their surface interval will see it and swim for it). Thanks God!!! I love rig diving!

[TGuthrie]

asf 52in LTD Padauk Biller

[catisle]

riffe metal tech 4s

[Kyle Parker]

this died 6 years ago