PDA

View Full Version : Barrel Plug


sullivanke
05-11-2008, 01:30 PM
Anybody have any ideas as to what can be used for a barrel Plug? Made some modifications on a Cayman 75 cm Omer. Put new Muzzle on and took out old plug. Ready to put new one on but need to make sure it will be waterproof, hence barrel plug. I know that Hammerhead sells them but was wondering if anyone has used anything else.
Also, anyone every hear of using two bands on this particular gun, new muzzle will accomodate two but am hesitant to put two on.
Lastly, I got a new shaft from Hammerhead spearguns. It is engaging into the loading mechanism but when I push the trigger it does not release without getting hungup on something inside...... It is a little shorter than the stock shaft but larger diameter and more mass.

THANKS>

azspearo
05-11-2008, 01:43 PM
You can get barrel plugs from McMaster-Carr. http://tinyurl.com/62r6n8 They are in bulk.
You posted on the Polespear Forum, you might want to re-post at the All About Guns Forum.

njspearo
05-11-2008, 08:35 PM
shoudnt this thread not be in polespear hawaiin sling section