Home Tournaments Calendar Weather Merchandise Sponsors

Go Back   Spearboard.com - The World's Largest Spearfishing Diving Boating Social Media Forum > Members List

Otolithco Otolithco is offline

Registered User

Visitor Messages

Showing Visitor Messages 1 to 3 of 3
  1. Diver278
    11-03-2016 08:09 AM
    Diver278
    Hi! Otolithco
    Feel free to call me at 619-864-2961 if you want to talk about the Philippines and diving and spearing there.

    Art
  2. BLT
    11-20-2014 07:07 AM
    BLT
    Hi Cam,
    Sorry for the slow reply. Haven't been on the forum much.
    I haven't had any issues in regards to overloading the mech with 4 bands (14mm = 9/16th diameter) if that's what you are getting at. The release is smooth.
    However, the stainless steel used by Nile-Tec isn't overly stainless. Where the line release recesses into the mech rusted up significantly, even with thorough fresh water flushing after use. The pronounced curve of the trigger itself makes it difficult for the push rod to engage the trigger. I had to heavily modify it. All the pins that hold the components in the mech aren't peened either. So the pins can slide out of the housing when the mech is removed. Everything does stay in place when the mech is housed in the gun.
    Would I use this mech again? No. It's not terrible. But it could be better. Eventually I'll swap it out for a reverse Neptonics which has a similar load rating from memory.
    Hope this helps!
  3. B shift
    07-24-2014 11:29 PM
    B shift
    I'm in Colorado but I can ship to the USA

Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: 07-30-2018 02:22 AM
  • Join Date: 06-16-2010

All times are GMT -5. The time now is 04:40 AM.


The World's Largest Spearfishing Diving Social Media Forum Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2014 Spearboard.com