View Single Post
Old 05-10-2018, 02:30 PM   #67
NPG-70
Registered User
 
NPG-70's Avatar
 
Join Date: Dec 2016
Location: Burleigh Heads, QLD, Australia
Posts: 39
Re: Double Roller Trigger for Pathos handle, Ermes Sub

I received a replacement mech today that has the front reinforcement, spring return line release, resolved rear roller skew issue and the wider front cradle roller.
The shaft aligns and loads perfectly, every issue resolved...except the front roller not rolling.
125 band stretch with 2 x 14mm @ 370% the trigger pull is still 3-4 times what is normal. I could handle a heavier trigger pull if it was smooth, but there is no give or feel to it until enough (unkown) force is amassed and of it goes.
Don't really feel this is usable.
NPG-70 is offline   Reply With Quote