Home Tournaments Calendar Weather Merchandise Sponsors

Go Back   Spearboard.com - The World's Largest Spearfishing Diving Boating Social Media Forum > Spearfishing Gear > All About Video and Photo Gear

All About Video and Photo Gear This section is for your video and photography gear questions, comments, and experiences

Reply
 
Thread Tools Rate Thread Display Modes
Old 05-01-2017, 01:39 PM   #16
Ric
Registered User
 
Join Date: Mar 2015
Posts: 133
Re: GoPro hero session

I lost my gopro3+ with the magenta filter, gone...my fault.
Anyways, now I am thinking:
Gopro4 vs Session which has the best sensitivity in low light ?
And I still want a magenta filter. I am not sure these filters can fit the Sessions or gopro5.

I have read review/comment that the filter doesn't make any difference. It does, but you are supposed to adjust the white balance with the software after the shooting. So a gopro that can't take a filter is not good to me.
Ric is offline   Reply With Quote
Old 05-04-2017, 07:23 AM   #17
Ric
Registered User
 
Join Date: Mar 2015
Posts: 133
Re: GoPro hero session

I can get a Hero4 refurbished
or a Session (Hero5 I assume).

Any advice is welcome.
Ric is offline   Reply With Quote
Old 05-09-2017, 08:52 AM   #18
Ric
Registered User
 
Join Date: Mar 2015
Posts: 133
Re: GoPro hero session

I finally got the Session (the Hero 4 session).

I tested it only in a dry situation. Image quality is certainly not better than my Gopro3+ silver. The 3+ was grainy in low light, so is the Session. The Narrow field is missing in the session but since I never used it, I wont complain about that. The big difference is in the controls.
I had to dig really hard in the Gopro web site to reinitialize the Session's Time and Date, using the manual way through the SD card.
Will see how it works in the waves. Hopefully it will be put and forget with no fussing. I hope the battery can hold 90minutes in the cold water, that 's all I ask. The 3+ could not do better than that.
And for the image quality, without a magenta filter, I don't even expect better than the 3+
Ric is offline   Reply With Quote
Old 05-17-2017, 06:52 PM   #19
Ric
Registered User
 
Join Date: Mar 2015
Posts: 133
Re: GoPro hero session

First try in the water for my Session4, first movie and...corrupted file or something that prevents me from making clips in GoproStudio
On the Gopro support FAQ, the blame is conveniently put on the SD card, but I am using the same SD type 10 card that I was using for my Hero3+ with no problem.
Ric is offline   Reply With Quote
Old 05-18-2017, 03:22 PM   #20
Ric
Registered User
 
Join Date: Mar 2015
Posts: 133
Re: GoPro hero session

The gopro softwares are so buggy or unpractical.

Gopro studio doesn't work anymore, it freezes after the conversion step and that is a problem that all users have encountered, yet Gopro didn't provide a patch for this problem.
We are left with another software from Gopro, called Quik. Quik doesn't allow to keep the original sound of the video and instead replace it with a Music track. And there is no option for not using the music, you must include one of the 10 'free' music tracks provided !
I used quotes for 'free', because even provided that you want to use the Music, some users report that Youtube warns them of copyrights infringement on this music !The solution, how surprising, is to subscribe to the non free version of Quik.
This is surrealist; Gopro forces you to break Youtube Copyrights with Quik and doesn't try to fix Gopro Studio !
You can't make clips out of your videos and build a small movie in Studio and Quik can only produce a 1 min clip, in addition to forcing you to use a music. What's left ? Windows Movie Maker . Thank you Gopro !

Brute videos out of the Session is OK, but no better than a Gopro hero 3. It's advertised as smaller than a classic hero, but not even IMO because it is shaped like a cube, thicker than the smallest dimension (width) of a classical hero.
Image quality is OK, performance OK. Magenta filter improves, but the problem with the softwares provided by Gopro is overwhelming.

So going for a Session was a mistake, I should have gone for a Classic hero, which are by the way more expensive, even a refurbished Hero4 is $100 more than a brand new Session 4. There must be a reason for that.
You have been warned.
Ric is offline   Reply With Quote
Old 05-19-2017, 09:10 AM   #21
Ric
Registered User
 
Join Date: Mar 2015
Posts: 133
Re: GoPro hero session

Quote:
Originally Posted by Jason7654 View Post
I have the hero session, which was originally called the hero 4 session. It's the under $200 version. I like it. My understanding is the sessions have the same video camera as the other goPros, but without the LCD screen. I mounted mine to my mask (a mako minimus) with a bolt/screw, then plastic epoxy:




I've used it snorkeling/lobstering up to 20 ft without a housing, and it was fine with that depth. The underwater sound is best with no housing. Here is an example video without a housing.

http://youtu.be/-yvl0OdyvEs


I was worried about scratching the lens putting my head into lobster holes, so I did get a housing. First I got this one which has a glass front. It shattered when I dropped it 2 feet after the second time using it. I then got this one which is all plastic. I've used it a half dozen times now and I like it. Here is an example video in that housing. You still hear things fairly well, and video quality seems the same.

http://youtu.be/O6CJTwlq4ak


I'm not sure what alldayreese means. This camera starts and stops recording when you hit the top button. I turn it off and on easily while freediving. I can hear the beeps that tell you if it is on or off (in case I forget and don't want to remove my mask to look). It works great.

The main negative I see is the battery life is not great, and you cannot remove the battery to pop in a spare. Mine gets 1:45-2 hours life. When it is dead, it can only be charged by USB.
Nice video.
Even if I rarely go under 20ft, I still use a housing case for protection against scratches from sand or rocks since it is always wavy and turbulent where I dive. Actually even with 'good viz' aka 20ft in NJ, I crashed head first on a rock while descending, and my cam hit the rock. No damages since it was in a case. Actually the filter must have hit first but it is not scratched in the center.

May I ask what video software did you use ? I'd assume gopro studio...how did you manage to make it work ?
Ric is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:30 AM.


The World's Largest Spearfishing Diving Social Media Forum Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2014 Spearboard.com