Home Tournaments Calendar Weather Merchandise Sponsors

Go Back   Spearboard.com - The World's Largest Spearfishing Diving Boating Social Media Forum > Spearfishing Gear > All About Video and Photo Gear

All About Video and Photo Gear This section is for your video and photography gear questions, comments, and experiences

Reply
 
Thread Tools Rating: Thread Rating: 5 votes, 5.00 average. Display Modes
Old 08-03-2013, 03:11 PM   #16
sperry
Registered User
 
sperry's Avatar
 
Join Date: Jun 2013
Location: Buxton, NC
Age: 55
Posts: 88
Re: Quick release Gopro mask mount

Quote:
Originally Posted by marginatus View Post
Ok, might have a few very soon if these turn out perfect in the first try (gained some experience with the C4 mount ).

Please keep in mind that these assume that your mask has the frame separated from the skirt and allows a hole to be drilled in the frame to take a screw. Or it can be glued (like epoxy). I think everyone is aware of this as some might already have some kind of mount this way...

This mount has a 15mm (vertical) distance from the centre of the hole to the base of the mount and a 10mm (horizontal) distance from the back of the mount to the surface that gets in contact with the frame.

Would these dimensions be suitable for you? If not, which?
the dimensions sound ideal.

i've got my mystic set aside for a gopro mount. just hadn't found one... until now. it looks like it'll fit perfectly. in fact the mystic already has a hole where the sporasub logo is held in place. i'm thinking it could be an easy installation.

count me in for a mount when you've got them built.
sperry is offline   Reply With Quote
Old 08-03-2013, 03:13 PM   #17
marginatus
Registered User
 
Join Date: May 2007
Location: S. Miguel Azores Portugal
Age: 41
Posts: 146
Re: Quick release Gopro mask mount

Quote:
Originally Posted by Cuda23 View Post
What brand of mask are you making the prototype for? I have a Riffe Sight/AQA mask and those measurements sound perfect.
I gathered measurements from a few masks and these looked like a good compromise...
Great, there will be one for you on this batch
marginatus is offline   Reply With Quote
Old 08-03-2013, 03:14 PM   #18
marginatus
Registered User
 
Join Date: May 2007
Location: S. Miguel Azores Portugal
Age: 41
Posts: 146
Re: Quick release Gopro mask mount

Quote:
Originally Posted by sperry View Post
the dimensions sound ideal.

i've got my mystic set aside for a gopro mount. just hadn't found one... until now. it looks like it'll fit perfectly. in fact the mystic already has a hole where the sporasub logo is held in place. i'm thinking it could be an easy installation.

count me in for a mount when you've got them built.
Ok, one for you in this batch, too.
thanks
marginatus is offline   Reply With Quote
Old 08-03-2013, 03:26 PM   #19
marginatus
Registered User
 
Join Date: May 2007
Location: S. Miguel Azores Portugal
Age: 41
Posts: 146
Re: Quick release Gopro mask mount

@SDDiver5 and @Yodaa, would these dimensions suit you as well?
marginatus is offline   Reply With Quote
Old 08-03-2013, 03:54 PM   #20
Yodaa
Registered User
 
Join Date: May 2011
Location: ct
Posts: 128
Re: Quick release Gopro mask mount

Hi. I have a seadive Seadiver HD. Not sure what's the measurements are but from the pics it look like it will work. I still would like one to test out. Thanks.
Yodaa is offline   Reply With Quote
Old 08-03-2013, 04:04 PM   #21
marginatus
Registered User
 
Join Date: May 2007
Location: S. Miguel Azores Portugal
Age: 41
Posts: 146
Re: Quick release Gopro mask mount

Quote:
Originally Posted by Yodaa View Post
Hi. I have a seadive Seadiver HD. Not sure what's the measurements are but from the pics it look like it will work. I still would like one to test out. Thanks.
Ok, I'll have one for you
marginatus is offline   Reply With Quote
Old 08-03-2013, 07:41 PM   #22
SpearS0CAL
Beau
 
SpearS0CAL's Avatar
 
Join Date: Aug 2006
Location: Santa Barbara, CA
Posts: 661
Re: Quick release Gopro mask mount

I'm currently traveling and don't have my mask with me. I'm sure I could make it work, I've mounted a GoPro tripod mount on the same model mask with no issues.
SpearS0CAL is offline   Reply With Quote
Old 08-03-2013, 09:05 PM   #23
marginatus
Registered User
 
Join Date: May 2007
Location: S. Miguel Azores Portugal
Age: 41
Posts: 146
Re: Quick release Gopro mask mount

Quote:
Originally Posted by SpearS0CAL View Post
I'm currently traveling and don't have my mask with me. I'm sure I could make it work, I've mounted a GoPro tripod mount on the same model mask with no issues.
It will just come down to vertical clearance but that should be no problem...
marginatus is offline   Reply With Quote
Old 08-08-2013, 09:11 AM   #24
Florida Freedivers
Sponsor
 
Florida Freedivers's Avatar
 
Join Date: Jun 2012
Location: 633 Northlake Blvd, North Palm Beach, FL 33408
Posts: 131
Re: Quick release Gopro mask mount

This is cool, I like it.

Do you plan to produce via injection molding or 3D printing?

I would highly recommend ShapeWays.com for 3D printing production. Their profit model works out fairly advantageous to the designer. Check them out if you haven't already! I'm personally a 3D printing fanatic.

-Nick
__________________
Florida Freedivers is offline   Reply With Quote
Old 08-08-2013, 09:23 AM   #25
Gary Schulte
Registered User
 
Gary Schulte's Avatar
 
Join Date: Feb 2003
Location: San Diego
Age: 66
Posts: 1,375
Send a message via AIM to Gary Schulte
Re: Quick release Gopro mask mount

This video I found on Youtube worked well for me. In the video it tells you which mask to buy. I think it was $37 delivered from Leisure Pro. Your mount would probably work easier because you can quickly detach the camera. I just returned from Hawaii and used the mask/camera quite a bit. I like it.

GoPro Scuba Dive Mask Mount - YouTube
Gary Schulte is offline   Reply With Quote
Old 08-08-2013, 09:38 AM   #26
SDDiver5
Registered User
 
SDDiver5's Avatar
 
Join Date: Jul 2011
Location: Encinitas, CA
Posts: 953
Re: Quick release Gopro mask mount

Quote:
Originally Posted by marginatus View Post
@SDDiver5 and @Yodaa, would these dimensions suit you as well?
My dog got my mask and chewed it up a little so thats a bummer.... Now a get a new mask! What mask are you basing this on/ what other masks will this fit? Im not sure what mask I will get yet.

D
SDDiver5 is offline   Reply With Quote
Old 08-08-2013, 10:38 AM   #27
marginatus
Registered User
 
Join Date: May 2007
Location: S. Miguel Azores Portugal
Age: 41
Posts: 146
Re: Quick release Gopro mask mount

Quote:
Originally Posted by Florida Freedivers View Post
This is cool, I like it.

Do you plan to produce via injection molding or 3D printing?

I would highly recommend ShapeWays.com for 3D printing production. Their profit model works out fairly advantageous to the designer. Check them out if you haven't already! I'm personally a 3D printing fanatic.
-Nick
I'm going with 3D printing.
I've used shapeways and i.materialize
I've ordered 6 copy's (multi copy discount) that should arrive tomorrow or Monday... so I'll have news very soon

Quote:
Originally Posted by SDDiver5 View Post
My dog got my mask and chewed it up a little so thats a bummer.... Now a get a new mask! What mask are you basing this on/ what other masks will this fit? Im not sure what mask I will get yet.

D
Better find some masks that fit you really well and then see if one of them can accommodate this... I know this is not the answer you wanted
As soon as i have these I'll mount on a mask and post "real" pictures

thanks for the interest

Last edited by marginatus; 08-08-2013 at 07:28 PM.
marginatus is offline   Reply With Quote
Old 08-09-2013, 01:54 PM   #28
marginatus
Registered User
 
Join Date: May 2007
Location: S. Miguel Azores Portugal
Age: 41
Posts: 146
Re: Quick release Gopro mask mount

Mount arrived today and looks great...
I had the Gopro fitting confirmed with the C4 mount and the screw and nut fit is perfect...
Have a few of these so I'll send PM to those that showed interest, by order (also had some on Facebook)...
I have a video uploading to Vimeo showing the mount and release with the mask on. I'll put the link as soon as it's processed. For now you can check the pics...


Video:

https://vimeo.com/72061531
Attached Thumbnails
Click image for larger version

Name:	SAM_8801.JPG
Views:	719
Size:	131.9 KB
ID:	194145   Click image for larger version

Name:	SAM_8802.jpg
Views:	689
Size:	74.4 KB
ID:	194146   Click image for larger version

Name:	SAM_8803.jpg
Views:	733
Size:	83.4 KB
ID:	194147   Click image for larger version

Name:	SAM_8804.jpg
Views:	750
Size:	73.7 KB
ID:	194148   Click image for larger version

Name:	SAM_8805.jpg
Views:	771
Size:	68.7 KB
ID:	194149  


Last edited by marginatus; 08-09-2013 at 03:59 PM.
marginatus is offline   Reply With Quote
Old 08-09-2013, 04:24 PM   #29
marginatus
Registered User
 
Join Date: May 2007
Location: S. Miguel Azores Portugal
Age: 41
Posts: 146
Re: Quick release Gopro mask mount

I sent 5 PM to the 5 people that showed interest...
As it stands I only have 4 available. From my experience with the C4 mount, some people lose the interest but this will be on a first to reply, first served..

I'm already looking at putting the part to sale on shapeways or i.materialize (or both) but probably the price won't be the same...
marginatus is offline   Reply With Quote
Old 08-09-2013, 05:22 PM   #30
Cuda23
Registered User
 
Cuda23's Avatar
 
Join Date: Nov 2010
Location: East Coast, FL
Posts: 310
Re: Quick release Gopro mask mount

Paypal money sent to your email address. The end product looks good, can't wait to try it out.
Cuda23 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:49 AM.


The World's Largest Spearfishing Diving Social Media Forum Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2014 Spearboard.com