Home Tournaments Calendar Weather Merchandise Sponsors

Go Back   Spearboard.com - The World's Largest Spearfishing Diving Boating Social Media Forum > General Topics (Non-regional) > Diving Safety, Accidents and Incidents

Diving Safety, Accidents and Incidents Post here to discuss accidents, incidents, ideas, gear, or anything else to improve spearfishing safety. Memorials and condolences threads should be placed in that separate forum.

Reply
 
Thread Tools Rate Thread Display Modes
Old 08-18-2017, 12:09 PM   #46
jfjf
.
 
jfjf's Avatar
 
Join Date: Oct 2003
Location: Palm Bch County
Posts: 10,069
Re: Zeagle Regulator Blows at 180 ft

I should probably add something to this discussion. Several people have mentioned feathering the valve ( basically open it half a turn, get some air and shut it off while you slowly exhale).


The rate of air loss in my situation was epic. I had around 2400 psi when it occurred, I shut it off in maybe 30 or 45 seconds and when we got on the boat the tank seemed pretty low on air. It was leaking faster than I would think could happen with the valve open and no regulator. The air was blasting out so fast that the second stage was giving me resistance. The effective intermediate pressure must have been low due to all the air being vented from the first stage before it could travel down a hose for my use.

Feathering a valve can work great for a freeflowing second stage or probably some other problems, but I doubt it would have worked well in this particular situation. Come to think of it _ a few weeks ago that exact thing happened with a buddy's pony bottle I borrowed for use on a freedive trip trying to recover a lost gun or fish. Luckily I was holding the tank in my hands, so I had easy access to the valve _ when I couldn't get the second stage to stop freeflowing by normal means.
jfjf is offline   Reply With Quote
Old 08-18-2017, 05:35 PM   #47
Spear One
Retired Comm. Shooter
 
Join Date: Sep 2002
Location: Largo, Florida
Posts: 4,776
Re: Zeagle Regulator Blows at 180 ft

Quote:
Originally Posted by jfjf View Post
An update, a zeagle representative has contacted me requesting the regulator for some forensic analysis. I am glad to hear that they were concerned enough about the failure to want to take a look.

They have also been more than fair with the disposition of the regulator. It took a little while, but in the end, they exhibited excellent customer service - even though I was up front about the fact that I was not the original owner and the reg was overdue for scheduled maintenance.
I heard through the grapevine/rumor mill that Huish was going to discontinue the Zeagle brand. Sad if they do as Zeagle was a great line for many years. Again, just a rumor, but since Huish recently acquired Oceanic/Hollis their regulator line is getting pretty crowded since they also own Atomic.
__________________
Ocean Rhino Spearguns: Designed & Built By Commercial Spearfishermen

Manufactured By: Spearfishing Specialties (727)-548-7686

E-mail: oceanrhino@gmail.com Web: OceanRhino.com
Spear One is online now   Reply With Quote
Old 08-19-2017, 09:12 AM   #48
jadairiii
Registered User
 
jadairiii's Avatar
 
Join Date: Sep 2005
Location: Ft. Lauderdale
Posts: 1,893
Re: Zeagle Regulator Blows at 180 ft

This incident is also a good lesson on why it may be a better option on deep dives to have doubles with an isolator valve. In this instance JfJf could have just as easily shut down the offending regulator and had access to all of the remaining gas in both tanks. Plus, shutting down a left or right post on doubles (I find) much easier than shutting down a single tank valve. Just a thought.

Notice, I have not championed H-Valves, I have yet to see an H-valve set up that is as easy to isolate a regulator as you can with doubles. Some are down right impossible based on the angle of the valve. And I have used and trained with H-valves. IMO, with H-valves the regulators are so close you cannot effectively distinguish which regulator is failing, even if you could shut them down, with doubles, it is extremely obvious which regulator has blown.
jadairiii is offline   Reply With Quote
Old 08-19-2017, 10:42 AM   #49
Marcus
Naval gazer extraordinair
 
Marcus's Avatar
 
Join Date: Jan 2003
Posts: 35,722
Re: Zeagle Regulator Blows at 180 ft

Quote:
Originally Posted by jadairiii View Post
This incident is also a good lesson on why it may be a better option on deep dives to have doubles with an isolator valve. In this instance JfJf could have just as easily shut down the offending regulator and had access to all of the remaining gas in both tanks. Plus, shutting down a left or right post on doubles (I find) much easier than shutting down a single tank valve. Just a thought.

Notice, I have not championed H-Valves, I have yet to see an H-valve set up that is as easy to isolate a regulator as you can with doubles. Some are down right impossible based on the angle of the valve. And I have used and trained with H-valves. IMO, with H-valves the regulators are so close you cannot effectively distinguish which regulator is failing, even if you could shut them down, with doubles, it is extremely obvious which regulator has blown.

Yea, but talk about cumbersome...It's over kill for that kind of diving IMO. A pony seems adequate. Maybe a little larger pony at those depths. Had Jim been near the end of the dive that happened...it could've been a different story.
BUT, I guess there is the option of using smaller tank sizes for what you describe. That would be about equal weight.
__________________
"If a nation expects to be ignorant and free, in a state of civilization, it expects what never was and never will be." ~Jefferson
Marcus is online now   Reply With Quote
Old 08-19-2017, 11:16 AM   #50
jadairiii
Registered User
 
jadairiii's Avatar
 
Join Date: Sep 2005
Location: Ft. Lauderdale
Posts: 1,893
Re: Zeagle Regulator Blows at 180 ft

Quote:
Originally Posted by Marcus View Post
Yea, but talk about cumbersome.......BUT, I guess there is the option of using smaller tank sizes for what you describe. That would be about equal weight.
Couple things with doubles, with a back plate they are closer to the body which gives you better balance and weight distribution. As, as you said, matching gas capacity, couple of smaller tanks, with same total cu ft, would be nice.

And with all the new wings, you could have the same profile just about.
jadairiii is offline   Reply With Quote
Old 08-19-2017, 11:21 AM   #51
Marcus
Naval gazer extraordinair
 
Marcus's Avatar
 
Join Date: Jan 2003
Posts: 35,722
Re: Zeagle Regulator Blows at 180 ft

Quote:
Originally Posted by jadairiii View Post
Couple things with doubles, with a back plate they are closer to the body which gives you better balance and weight distribution. As, as you said, matching gas capacity, couple of smaller tanks, with same total cu ft, would be nice.

And with all the new wings, you could have the same profile just about.
And the likelihood of the H valve blowing which would be a catastrophic fhttp://spearboard.com/showthread.php?t=193916ailure, I presume from my limited knowledge?
__________________
"If a nation expects to be ignorant and free, in a state of civilization, it expects what never was and never will be." ~Jefferson

Last edited by Marcus; 08-19-2017 at 11:55 AM.
Marcus is online now   Reply With Quote
Old 08-19-2017, 12:16 PM   #52
Marcus
Naval gazer extraordinair
 
Marcus's Avatar
 
Join Date: Jan 2003
Posts: 35,722
Re: Zeagle Regulator Blows at 180 ft

Quote:
Originally Posted by Spear One View Post
I heard through the grapevine/rumor mill that Huish was going to discontinue the Zeagle brand. Sad if they do as Zeagle was a great line for many years. Again, just a rumor, but since Huish recently acquired Oceanic/Hollis their regulator line is getting pretty crowded since they also own Atomic.
That's VERY unfortunate. It's very hard to make anything fool proof, as a company. BTW, this isn't an attack upon Jim's actions. A company really has to consider the actions of such users so that they don't become liable or get a bad reputation.
That being said, it's almost impossible to prevent your brand from getting sullied by users that disregard the recommended maintenance/service. All you can do, as a company, is find root cause and implement corrective action in order to protect your brand.
What this sounds like here is that the equipment was inadequately serviced and not the fault of the supplier. Yet...the supplier is having to defend itself and losing market share due to the such an incident...when it's not really the supplier's fault.
BTW, I'm just explaining this due to the fact I deal w/ these types of issues in my engineering job all the time...and I'm just calling it like I see it...no offense to any party intended. I've certainly have violated such before so I'm surely not passing judgement.
__________________
"If a nation expects to be ignorant and free, in a state of civilization, it expects what never was and never will be." ~Jefferson

Last edited by Marcus; 08-19-2017 at 12:36 PM.
Marcus is online now   Reply With Quote
Old 08-19-2017, 01:24 PM   #53
jfjf
.
 
jfjf's Avatar
 
Join Date: Oct 2003
Location: Palm Bch County
Posts: 10,069
Re: Zeagle Regulator Blows at 180 ft

Well, the Zeagle rep has indicated that he would let me know what their examination reveals. So we don't really know anything.

I doubt he thinks I would keep it secret, so when I hear, i will provide a follow up - maybe next week?

Thus far, Zeagle seems to be exhibiting excellent product support --- I can't even say customer support - because i was not their customer.

I'm not so sure something like this should or would affect sales, obviously this type of failure is very rare, they are taking it seriously and the end result may be something that is entirely outside of their control.

To be honest, when I see Dan use Zeagle to plus 400 ft... that is pretty much good enough for me. I felt comfortable buying a used one and it worked well.. until it didn't.

Maybe 6 Years ago, I bought some cheap generic first stage off the internet (a new regualtor) - which also had a diaphragm. I think it was like $45 or something. Used it for maybe 25 dives and then one day... I was inhaling and POP.. I could feel something changed in the regulator and I think it started to free flow a little. It was a small pop and I think I kept going on the 80 or 100 ft dive since I had redundancy. No air loss that I can remember, other than a slightly bubbling second stage.

Took the reg to a shop, they said the seat (not the diaphram) had cracked or something and they fixed it and wanted $45 for the repairs. I had thought it might have been cheaper and decided I was no longer a fan of that reg so i offered to just give them the reg in exchange for the work they had done. They were very agreeable to it and I have been using primarily Scuba Pro (piston) first stages for like 20 years I think.

These two incidents are the only times I can remember me having a sudden issue with a first stage.
jfjf is offline   Reply With Quote
Old 08-19-2017, 11:30 PM   #54
Mobile Diver
Registered User
 
Mobile Diver's Avatar
 
Join Date: Jan 2004
Location: Key West, FL
Posts: 5,789
Re: Zeagle Regulator Blows at 180 ft

WOW. Glad you are OK. Great job. Keep us posted.
__________________
Steve Moore
www.keysmobilediving.com
steve@keysmobilediving.com
305 849 0866
Mobile Diver is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:24 PM.


The World's Largest Spearfishing Diving Social Media Forum Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2014 Spearboard.com