SP1 problems

[Msturm]

I recently moved from Hawaii to Alaska. I love it here and diving here is pretty rad too. However, I took my SP1 out of the drawer, I have had it less than a year and put it on for today's sesh.

All was well for the first 2 hours, then the face showed this and will not change. (the time at the bottom remains correct though)



The temp says LO. the Depth says HI and the time is spot on. lol.

Anyone had this problem? Know a fix? I have tried the reset in the manual but it is not working.

Thanks

[Ryang85]

Originally Posted by Msturm

I recently moved from Hawaii to Alaska. I love it here and diving here is pretty rad too. However, I took my SP1 out of the drawer, I have had it less than a year and put it on for today's sesh.

All was well for the first 2 hours, then the face showed this and will not change. (the time at the bottom remains correct though)



The temp says LO. the Depth says HI and the time is spot on. lol.

Anyone had this problem? Know a fix? I have tried the reset in the manual but it is not working.

Thanks

Your battery is nearly dead. I just replaced mine last week. Go pick up a 2032 at the local hardware store and carefully replace it. Should take a about 3 minutes and cost 3 dollars as long as you are gentle with the seal.

Sent from my SM-G930V using Tapatalk

[Msturm]

Thanks! RyanG.

I will do that!