Hi Dean,
I do have a few but I'm away from home right now so I can't say exactly what size the blanks are until I get back home next week. What size are you looking for?
Bill
This would need to be made on a cnc machine to be fast enough for the cost to be practical. It would take a lot of hours (for me, anyway) to make a prototype. Jeff has made some roller muzzles for pipe guns, but not as elaborate. It might be something he would consider. I'll pass this along to him.
Bill Imsorry I havent sent the money yet...something came up and I needed it for my son. I will be sending it to you within 2 days buddy. Sorry again,
Henry
I don't keep any on hand since they are custom for a particular gun. The tracks fit in a dovetail that is 8 degrees with an 11/16" width at the widest part (Available for $12 online with free shipping in the us.). I charge $60 for a track up to 48" with an additional $10 per foot (or partial foot) over 48". I can cut the track for anything from a 9/32" to a 3/8" shaft, including anything in between. I use special custom made ball cutters that are slightly oversized for the shaft, and have a 3/16" neck. This allows me to cut a track that will shoot a 9/32" or a 5/16" shaft without the small shaft falling out.
Information I would need to know:
1) Overall length of the track
2) Shaft diameter(s)
Depending on overall length, I could probably get them made and shipped next week.
Feel free to call me at (251) 980-1153 if you would like to discuss over the phone.
How are you, I spoke to Jeff about a delrin track and he says you are the guy to speak too. Can you help me? I need an enclosed track for a custom gun that I am building. If you could please let me know what the cost is, and other specifics. I also have a couple of friends who are interested in the tracks.
Thanks,
Henry
305-469-4835