Re: carbonfiber?
there are a lot of ways to do it and a lot depends on your skill level working with fabrics and epoxy . i use positive ,and reverse molds, electric tape , vac bag, and most often just plain old hand lay up . the best advice i can give you is do a bunch of 1' test blanks to figure out what works and what doesn't.once you get it down you can do a lot of cool stuff .take your time with your prep and dont have any hard edges . also stay away from kevlar unless you are very good , with kev you only get one shot and you cant sand it it just turns to fuzz .
phil
|