View Single Post
Old 05-27-2018, 07:21 AM   #7
mishu1984
Registered User
 
mishu1984's Avatar
 
Join Date: Aug 2004
Location: Kuwait الكويت
Posts: 170
Re: MAKO: Q8 SS Inserts for Small ID Latex Bands

what knot are you using in the picture?


Quote:
Originally Posted by MAKO Spearguns View Post
Q8 Stainless Steel Wishbone Inserts for small ID (1/16") tubing

Designed by SpearQ8, who is arguably the most well respected authority on speargun kinetics and technology, these stainless steel wishbone
inserts are made specifically for small (1/16") ID tubing, such as the MAKO/Primeline small ID tubing.



These are the best wishbone inserts for small ID tubing that I have seen.

  • You can change your dyneema without re-tying bands (no tools needed)
  • They are easy to install.
  • They won’t pull out.
  • And they keep the water from being siphoned into the bands.
  • These things are awesome!


Warning: Do not use these wishbone inserts for regular ID tubing. They are specifically designed for the MAKO/Primeline small ID tubing.

Helpful hint: Burn a “stop bulb” on each end before tying your knots. These “stop bulbs” provide additional protection against knots slipping.

http://bit.ly/mako-q8insert

Dive Safe

Dano
__________________
mishu1984 is offline   Reply With Quote