Home Tournaments Calendar Weather Merchandise Sponsors

Go Back   Spearboard.com - The World's Largest Spearfishing Diving Boating Social Media Forum > Sponsor Announcements! > Manufacturers

Manufacturers Here is info relevant to manufacturers who are sponsors of Spearboard.

Reply
 
Thread Tools Rate Thread Display Modes
Old 05-18-2018, 08:41 PM   #1
MAKO Spearguns
Sponsor
 
MAKO Spearguns's Avatar
 
Join Date: Jan 2009
Posts: 1,482
MAKO: Q8 SS Inserts for Small ID Latex Bands

Q8 Stainless Steel Wishbone Inserts for small ID (1/16") tubing

Designed by SpearQ8, who is arguably the most well respected authority on speargun kinetics and technology, these stainless steel wishbone
inserts are made specifically for small (1/16") ID tubing, such as the MAKO/Primeline small ID tubing.



These are the best wishbone inserts for small ID tubing that I have seen.

  • You can change your dyneema without re-tying bands (no tools needed)
  • They are easy to install.
  • They won’t pull out.
  • And they keep the water from being siphoned into the bands.
  • These things are awesome!


Warning: Do not use these wishbone inserts for regular ID tubing. They are specifically designed for the MAKO/Primeline small ID tubing.

Helpful hint: Burn a “stop bulb” on each end before tying your knots. These “stop bulbs” provide additional protection against knots slipping.

http://bit.ly/mako-q8insert

Dive Safe

Dano
__________________


http://www.makospearguns.com/

http://www.facebook.com/makospearguns



HIGH PERFORMANCE GEAR - DIRECT FROM MAKO - NO DIVE SHOP MARKUP!
MAKO Spearguns is offline   Reply With Quote
Old 05-19-2018, 11:39 AM   #2
Timinator
Registered User
 
Timinator's Avatar
 
Join Date: Oct 2011
Posts: 865
Re: MAKO: Q8 SS Inserts for Small ID Latex Bands

I would imagine shipping won't be too much either since they're so small.....?
__________________
Ever notice how Democrats scatter from the truth like cockroaches from light?
Timinator is offline   Reply With Quote
Old 05-19-2018, 04:34 PM   #3
sealark
Registered User
 
sealark's Avatar
 
Join Date: Oct 2007
Location: Pensacola Fl
Posts: 512
Re: MAKO: Q8 SS Inserts for Small ID Latex Bands

Quote:
Originally Posted by Timinator View Post
I would imagine shipping won't be too much either since they're so small.....?
I just checked on shipping for 3 pair it's 12$ shipping.
sealark is offline   Reply With Quote
Old 05-19-2018, 07:32 PM   #4
Spear One
Retired Comm. Shooter
 
Join Date: Sep 2002
Location: Largo, Florida
Posts: 5,140
Re: MAKO: Q8 SS Inserts for Small ID Latex Bands

Hey Dano, what is the dia of the ball and the dia of the shank?
__________________
Ocean Rhino Spearguns: Designed & Built By Commercial Spearfishermen

Manufactured By: Spearfishing Specialties (727)-548-7686

E-mail: oceanrhino@gmail.com Web: OceanRhino.com
Spear One is online now   Reply With Quote
Old 05-21-2018, 08:35 AM   #5
MAKO Spearguns
Sponsor
 
MAKO Spearguns's Avatar
 
Join Date: Jan 2009
Posts: 1,482
Re: MAKO: Q8 SS Inserts for Small ID Latex Bands

Hey Spear One,


The diameter of the ball is 6.45mm. The shank is actually tapered. At the ball, the diameter of the shank is 2.89mm. At the hole end, the diameter is 2.73mn.

Hey Sealark,


Thanks for bringing this to my attention. Our software system has difficulty calculating shipping on very small items such as this when they are purchased without additional items. I will get that fixed today.

Thanks!


dano
__________________


http://www.makospearguns.com/

http://www.facebook.com/makospearguns



HIGH PERFORMANCE GEAR - DIRECT FROM MAKO - NO DIVE SHOP MARKUP!
MAKO Spearguns is offline   Reply With Quote
Old 05-21-2018, 10:31 AM   #6
Spear One
Retired Comm. Shooter
 
Join Date: Sep 2002
Location: Largo, Florida
Posts: 5,140
Re: MAKO: Q8 SS Inserts for Small ID Latex Bands

"Hey Spear One, The diameter of the ball is 6.45mm. The shank is actually tapered. At the ball, the diameter of the shank is 2.89mm. At the hole end, the diameter is 2.73mn."

Thanks Dano
__________________
Ocean Rhino Spearguns: Designed & Built By Commercial Spearfishermen

Manufactured By: Spearfishing Specialties (727)-548-7686

E-mail: oceanrhino@gmail.com Web: OceanRhino.com
Spear One is online now   Reply With Quote
Old 05-27-2018, 07:21 AM   #7
mishu1984
Registered User
 
mishu1984's Avatar
 
Join Date: Aug 2004
Location: Kuwait الكويت
Posts: 170
Re: MAKO: Q8 SS Inserts for Small ID Latex Bands

what knot are you using in the picture?


Quote:
Originally Posted by MAKO Spearguns View Post
Q8 Stainless Steel Wishbone Inserts for small ID (1/16") tubing

Designed by SpearQ8, who is arguably the most well respected authority on speargun kinetics and technology, these stainless steel wishbone
inserts are made specifically for small (1/16") ID tubing, such as the MAKO/Primeline small ID tubing.



These are the best wishbone inserts for small ID tubing that I have seen.

  • You can change your dyneema without re-tying bands (no tools needed)
  • They are easy to install.
  • They won’t pull out.
  • And they keep the water from being siphoned into the bands.
  • These things are awesome!


Warning: Do not use these wishbone inserts for regular ID tubing. They are specifically designed for the MAKO/Primeline small ID tubing.

Helpful hint: Burn a “stop bulb” on each end before tying your knots. These “stop bulbs” provide additional protection against knots slipping.

http://bit.ly/mako-q8insert

Dive Safe

Dano
__________________
mishu1984 is offline   Reply With Quote
Old 05-30-2018, 09:38 PM   #8
MAKO Spearguns
Sponsor
 
MAKO Spearguns's Avatar
 
Join Date: Jan 2009
Posts: 1,482
Re: MAKO: Q8 SS Inserts for Small ID Latex Bands

I'm working on getting some pictures together. Sorry for my slow response.

Thanks

dano
__________________


http://www.makospearguns.com/

http://www.facebook.com/makospearguns



HIGH PERFORMANCE GEAR - DIRECT FROM MAKO - NO DIVE SHOP MARKUP!
MAKO Spearguns is offline   Reply With Quote
Old 05-31-2018, 09:41 PM   #9
MAKO Spearguns
Sponsor
 
MAKO Spearguns's Avatar
 
Join Date: Jan 2009
Posts: 1,482
Re: MAKO: Q8 SS Inserts for Small ID Latex Bands

Hey mishu 1984,

Sorry for the delay in responding. I was traveling yesterday.
There are actually two knots that are recommended by SpearQ8.

• single loop
• double loop

In either case, before tying your knot, there are two important requirements.

#1: The bridle material must be stiff, like my South African Wishbone cordage.
I have tested wishbone cordage from many suppliers from around the world and the
South African cordage is the toughest cordage I have found.

#2: You must create a really good size “burn ball” at the end of your cord.
If you are unsure about the integrity of the burn ball, you can add a simple
half hitch knot at the end for added assurance that it will not pull through.


Below is a photo of the burn ball only.


Below is a photo of the burn ball plus a simple half hitch knot.



Single loop Knot:

Step 1:
Thread cordage through hole and create a burn ball at the end.




Step 2: Wrap the cordage around the shank one time and pass the end through the loop that you just created.



Step 3: Pull tight, ensuring the burn ball is well outside of the knot.



NOTE: For additional confidence, you can also tie a ˝ hitch knot on the end after you create your burn ball.


Double loop:


Step 1:
Thread cordage through hole and create a burn ball at the end.



Step 2: Wrap the cordage around the shank two times and pass the end through the two loops that you just created.






Step 3: Pull tight, ensuring the burn ball is well outside of the knot.



Once again, I would like to thank SpearQ8 for sharing these awesome inserts with me.
We are all pretty darn lucky to have him around.

Dive safe,
dano
Attached Thumbnails
Click image for larger version

Name:	try 1.jpg
Views:	1314
Size:	159.8 KB
ID:	238226   Click image for larger version

Name:	try2.jpg
Views:	1353
Size:	158.0 KB
ID:	238227   Click image for larger version

Name:	try3.jpg
Views:	1322
Size:	158.8 KB
ID:	238228   Click image for larger version

Name:	try4.jpg
Views:	1336
Size:	156.8 KB
ID:	238229   Click image for larger version

Name:	try5.jpg
Views:	1325
Size:	156.7 KB
ID:	238230  

Click image for larger version

Name:	try6.jpg
Views:	1353
Size:	159.3 KB
ID:	238231   Click image for larger version

Name:	try7.jpg
Views:	1325
Size:	160.1 KB
ID:	238232   Click image for larger version

Name:	111.jpg
Views:	1325
Size:	29.0 KB
ID:	238233  
__________________


http://www.makospearguns.com/

http://www.facebook.com/makospearguns



HIGH PERFORMANCE GEAR - DIRECT FROM MAKO - NO DIVE SHOP MARKUP!
MAKO Spearguns is offline   Reply With Quote
Old 06-03-2018, 05:59 PM   #10
mishu1984
Registered User
 
mishu1984's Avatar
 
Join Date: Aug 2004
Location: Kuwait الكويت
Posts: 170
Re: MAKO: Q8 SS Inserts for Small ID Latex Bands

thank you sir!
__________________
mishu1984 is offline   Reply With Quote
Old 06-06-2018, 02:55 PM   #11
Snapper Mangler
Registered User
 
Snapper Mangler's Avatar
 
Join Date: Jun 2013
Location: stuart fl
Age: 37
Posts: 647
Re: MAKO: Q8 SS Inserts for Small ID Latex Bands

Man these are sweet, going to have to order a small handfull
Snapper Mangler is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:52 AM.


The World's Largest Spearfishing Diving Social Media Forum Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2002 - 2014 Spearboard.com