Home | Tournaments | Calendar | Weather | Merchandise | Sponsors |
|
General Spearfishing & Diving Discussion This is where you post to discuss general spearfishing topics that could apply to any region. |
|
Thread Tools | Rate Thread | Display Modes |
09-10-2018, 01:54 PM | #1 |
Registered User
Join Date: Apr 2010
Location: Cabo San Lucas & Mazatlán
Posts: 20
|
Aeris F10 V2 Fail
Hi,
After using my Aeris F10 V2 for a few years, it has malfunctioned for the first time. It will not go into dive mode once im in the water and when it will only display the regular time and temperature modes. I have replaced the battery but that did not help. Is there anywhere that i can send the watch for repair?? Any info will be greatly appreciated! |
02-14-2020, 01:43 PM | #2 |
Registered User
Join Date: Jun 2015
Location: Palo Alto, CA
Posts: 51
|
Re: Aeris F10 V2 Fail
I assume you've already sorted this out, but I've had several similar issues with my F10. Twice the pressure sensor/depth gauge has failed. One time it failed completely and would not function at all, the other time it would read incorrectly (would read 20 ft when I was closer to 60 ft deep, for example). The first time Oceanic replace it under warranty, the second time they made me pay for the repair. At $145 for a repair and a part that seems to repeatedly fail, I'll be looking elsewhere for my next watch.
For repair, you need to register the watch and then contact Oceanic for service at https://www.oceanicworldwide.com/us/support/service/ |
Bookmarks |
Thread Tools | |
Display Modes | Rate This Thread |
|
|