Home | Tournaments | Calendar | Weather | Merchandise | Sponsors |
|
Manufacturers Here is info relevant to manufacturers who are sponsors of Spearboard. |
|
Thread Tools | Rate Thread | Display Modes |
10-14-2018, 07:24 PM | #1 |
Sponsor
Join Date: Jan 2009
Posts: 1,482
|
MAKO Spearguns: NEW - Rapid Change Wishbones
Rapid Band Change Wishbones for 14.5mm small ID tubing
http://bit.ly/mako-rbcw MAKO Spearguns Rapid Band Change Wishbones make changing 14.5mm small ID bands fast and easy. Our 14.5mm small ID power band latex tubing is fast becoming the most popular tubing in the world for spearfishing. NO TOOLS NEEDED NO CUTTING NEEDED No slits in your muzzles? ...NO PROBLEM! Install, remove and re-install your bands as often as you like, quickly and easily. Specifically made for 14.5mm small ID tubing. NOTE: DO NOT USE ON REGULAR ID TUBING OR TUBING LARGER THAN 14.5MM as it may pull out. MAKO Speargun bands are the best in the world because they are made by Primeline Industries USA. If it isn't Primeline, it is not the best. Includes two loop knots hand dipped in rubber to prevent water intrusion into bands and the Dyneema wishbone.
__________________
http://www.makospearguns.com/ http://www.facebook.com/makospearguns HIGH PERFORMANCE GEAR - DIRECT FROM MAKO - NO DIVE SHOP MARKUP! |
10-14-2018, 09:05 PM | #2 |
47.3 lbs
Join Date: Oct 2008
Location: San Diego
Posts: 531
|
Re: MAKO Spearguns: NEW - Rapid Change Wishbones
No tools needed? I have got to see that technique. JK
|
10-15-2018, 05:13 AM | #3 | |
Registered User
Join Date: Jan 2017
Location: Stockholm, Sweden
Posts: 286
|
Re: MAKO Spearguns: NEW - Rapid Change Wishbones
Different insert, but same technique.
Quote:
|
|
Bookmarks |
Thread Tools | |
Display Modes | Rate This Thread |
|
|