Home | Tournaments | Calendar | Weather | Merchandise | Sponsors |
|
All About Guns What's your weapon of choice, and why? Discuss the beloved speargun here! |
|
Thread Tools | Rate Thread | Display Modes |
01-19-2016, 09:29 AM | #1 |
Registered User
Join Date: Jan 2014
Location: Corpus Christi Texas
Age: 44
Posts: 266
|
Neptonics reverse trigger mechanism
Hey I've been using the netonics reverse trigger mechanism I really like it it seems like a very well built trigger and his work well for me so far but I'm trying to build a small hole gun and need a shorter shaft I don't want to spend a lot of money on an expensive shaft for something I'm going to be shooting into rocks does anybody know of any other brands of shaft that will fit in this trigger mechanism
|
01-19-2016, 12:50 PM | #2 |
Kody Panui
Join Date: Jan 2015
Location: Kauai, HI
Posts: 20
|
Re: Neptonics reverse trigger mechanism
Speardeals has a 32" Riffe shaft, and Jbl has a 29" for their Nor'easter gun. The Riffe is threaded and the Jbl is threaded w/ flopper.
|
01-19-2016, 02:13 PM | #3 |
Registered User
Join Date: Jan 2014
Location: Corpus Christi Texas
Age: 44
Posts: 266
|
Re: Neptonics reverse trigger mechanism
So riffe and jbl will fit
|
01-19-2016, 04:34 PM | #4 |
Kody Panui
Join Date: Jan 2015
Location: Kauai, HI
Posts: 20
|
Re: Neptonics reverse trigger mechanism
Yes. This past Christmas break I built a little 27" gun and used the reverse mech. Both of the shafts went into the mech. I should add that they were 9/32 and American cut.
|
01-19-2016, 06:41 PM | #5 |
Registered User
Join Date: Oct 2013
Location: Simi Valley
Age: 43
Posts: 642
|
Re: Neptonics reverse trigger mechanism
As far as I know, any American notched shaft should work with that mech.
|
01-19-2016, 08:59 PM | #6 |
Registered User
Join Date: Apr 2007
Location: santa cruz
Age: 48
Posts: 5,473
|
Re: Neptonics reverse trigger mechanism
Riffe
These jbl shafts http://www.neptonicsystems.com/speargun-shafts.php , mori,wong,addiction/dean . Will all work Jbl shafts for pipe guns and elite guns will not work without modification |
01-19-2016, 11:24 PM | #7 |
Registered User
Join Date: Aug 2013
Posts: 147
|
Re: Neptonics reverse trigger mechanism
I think the reverse mech will work with a euro notched shaft.
|
01-20-2016, 01:02 AM | #8 |
Registered User
Join Date: Apr 2007
Location: santa cruz
Age: 48
Posts: 5,473
|
Re: Neptonics reverse trigger mechanism
it will , work with some brands (as will all american mechs ) but not all euro shafts are cut the same ,so while some or must will work , it isnt safe to make a blanket statement that you can use a euro cut shaft in a american mech . they may also seam to lock in and work bit can fail unexpectedly later under load
|
Bookmarks |
Thread Tools | |
Display Modes | Rate This Thread |
|
|