|02-07-2010, 05:21 PM||#1|
Join Date: Apr 2004
Location: Palm Beach Florida USA
FF - Clearing Torres Shafts.
I am clearing my remaining stock of Torres 9/32" diameter shafts.
These are Euro cut and will fit most, if not all Euro style guns.
The shafts are made from 17/4ph heat treated stainless steel and are the usual copper/brown color, typical from heat treatment.
2 * notches with a hole at the back.
Not the ultimate quality in shafts and definitely not as strong as RA shafts but very usable and at $15 each!!
I will initially sell them in bundles of 5 for $75 a bunch.
If you are in Florida then the appropriate Sales Tax will be applied and shipping will be at the buyers cost.
I am not interested in exporting them, so please do not ask.
They will be shipped (preferably) UPS Ground.
Please PM me with any orders and Paypal will be the preferred payment method.
The following are all the remaining Tahitian Flopper with pencil point (Rockpoint) :-
1 bundle of 5 * 120cm shafts
2 bundles of 5 * 140cm
1 bundles of 5 * 150cm.
1 bundles of 5 * 160cm.
3 bundles of 5 * 170cm.
2 bundles of 5 * 180cm.
The following are 6mm threaded shafts :-
3 bundles of 5 * 110cm shafts
5 bundles of 5 * 120cm.
3 bundles of 5 * 130cm.
One bundle per SB Member please.
Ex - Florida Freedivers.
Last edited by florfreediver; 02-10-2010 at 07:55 AM.
|Display Modes||Rate This Thread|